STALE CIAGNIONE - SZLIFOWANE
The COLD-DRAWN PRODUCTS offered by Trafital are obtained by processing from rolls or bars. Flat and square drawn products are normally supplied with sharp edges and in their natural state, it is also possible to supply the products with specific heat treatment of stress relief, annealing, normalization and quenched and tempered condition . The commercial length of the bars is 3 or 6 m and fixed lengths can be supplied upon request. Trafital offers the possibility of supplying special profiles, rounded, rounded and shaped. The carbon steels normally available are structural or construction types, free-cutting steels and tempered steels. On request it is possible to supply the bars in other steel qualities. Some of the steels available for flat, square, round and hexagonal drawn plates: Structural or construction steels: S235JR / S275JR / S355J2 Free cutting steels: 11SMn30 / 11SMn37 / 11SMnPb30 / 11SMnPb37 Tempered steels: C45 / 39NiCrMo3 / 42CrMo4 On request it is possible to supply the drawn bars in other steel qualities.
GOTOWY NA MAGAZYNIE ARKUSZE DANYCH
Stal S235JR ciągniona (Fe 360 B)
Available profiles
PŁASKOWNIKI: od 4 x 2 do 500 x 40 mm (grubości do 100 mm)
KWADRATY: od 3 x 3 do 150 x 150 mm (powyżej 150x150 do 250x250 także walcowane)
SZEŜCIOKĄTY: od 4 do 100 mm
KĄTOWNIKI: od 10 x 10 x 2 do 100 x 100 x 10 mm
PROFILE TYPU "L": od 25 x 15 x 3 do 100 x 50 x 10 mm
PROFILE TYPU "T": od 20 x 20 x 3 do 79 x 79 x 9 mm (na żądanie)Specifications
Acciaio S235JR (ex Fe360 B) - Steel S235JR
COMPOSIZIONE CHIMICA - CHEMICAL COMPOSITION (EN 10277-2:2008)
| C% | Si% | Mn% | P% | S% | N% | Cu% | |
| Min | - | - | - | - | - | - | - |
| Max | 0.17 | - | 1.40 | 0.040 | 0.040 | 0.012 | 0.55 |
CARATTERISTICHE MECCANICHE TRAFILATO +C - COLD-DRAWN MECHANICAL PROPERTIES +C (EN 10277-2:2008)
| Spessore - Thickness mm. | Rp0,2 min. N/mm2 | Rm (MinMax) N/mm2 | A% Min |
| ≥5≤10 | 355 | 470840 | 8 |
| >10≤16 | 300 | 420770 | 9 |
| >16≤40 | 260 | 390730 | 10 |
| >40≤63 | 235 | 380670 | 11 |
| >63≤100 | 215 | 360640 | 11 |
Stal węglowa C 45 ciągniona
Available profiles
PŁASKOWNIKI: od 8 x 7 do 250 x 30 mmKWADRATY: od 5 x 5 do 130 x 130 mm (powyżej 130x130 do 250x250 także walcowane)SZEŜCIOKĄTY: od 6 do 100 mmSpecifications
Acciaio C45 - Steel C45
COMPOSIZIONE CHIMICA - CHEMICAL COMPOSITION (EN 10083-2:2006)
| C% | Si% | Mn% | P% | S% | Cr% | Mo% | Ni% | Cr+Mo+Ni% | |
| Min | 0.42 | - | 0.50 | - | - | - | - | - | - |
| Max | 0.50 | 0.40 | 0.80 | 0.045 | 0.045 | 0.40 | 0.10 | 0.40 | 0.63 |
CARATTERISTICHE MECCANICHE TRAFILATO +C - COLD-DRAWN MECHANICAL PROPERTIES +C (EN 10277-5:2008)
| Spessore - Thickness mm. | Rp0,2 min. N/mm2 | Rm (MinMax) N/mm2 | A% Min |
| ≥5≤10 | 565 | 7501050 | 5 |
| >10≤16 | 500 | 7101030 | 6 |
| >16≤40 | 410 | 6501000 | 7 |
| >40≤63 | 360 | 630900 | 8 |
| >63 | 310 | 580850 | 8 |
Stal węglowa C 45 ciągnione na kluczyki
Available profiles
PŁASKOWNIKI: od 8 x 7 do 100 x 50 mm (tolerancja h9 x h11)KWADRATY: od 6 x 6 do 90 x 90 mm (tolerancja h9 x h9)Specifications
Acciaio C45 - Steel C45
COMPOSIZIONE CHIMICA - CHEMICAL COMPOSITION (EN 10083-2:2006)
| C% | Si% | Mn% | P% | S% | Cr% | Mo% | Ni% | Cr+Mo+Ni% | |
| Min | 0.42 | - | 0.50 | - | - | - | - | - | - |
| Max | 0.50 | 0.40 | 0.80 | 0.045 | 0.045 | 0.40 | 0.10 | 0.40 | 0.63 |
CARATTERISTICHE MECCANICHE TRAFILATO +C - COLD-DRAWN MECHANICAL PROPERTIES +C (EN 10277-5:2008)
| Spessore - Thickness mm. | Rp0,2 min. N/mm2 | Rm (MinMax) N/mm2 | A% Min |
| ≥5≤10 | 565 | 7501050 | 5 |
| >10≤16 | 500 | 7101030 | 6 |
| >16≤40 | 410 | 6501000 | 7 |
| >40≤63 | 360 | 630900 | 8 |
| >63 | 310 | 580850 | 8 |
Ponadto na żądanie Klienta:
- Płaskowniki i kwadraty ciągnione o krawędziach zaokrąglonych zukosowanych
- Stale na listwy zębate
- Wymiary specjalne